Bridgetek FT93x Embedded Microcontrollers
Bridgetek FT93x Embedded Microcontrollers (MCUs) are 32-bit System-On-Chip (SoC) RISC MCUs for USB to multi-interface bridging and embedded applications. The FT93x series include FT930, FT931, FT932, and FT933 MCUs and features high level integration and low power consumption. These MCUs include 128kB on-chip flash memory and power-on reset. The modules transfer data at up to 25MHz and operate in an -40°C to +85°C extended temperature range. Also unique to the FT93x series is the option to use a hardcoded Bridgetek USB engine as an alternative to developing code for standard USB class enabling rapid development of USB devices with a wider range of application IO. Applications include E-meters, medical appliances, instrumentation, and more.
Bridgetek FT930, FT931, FT932, and FT933 MCUs are offered in compact 48-, 56-, and 68-pin QFN packages that are lead free and RoHS compliant.
Features
- High-performance, low power mixed 16-bit/32-bit FT32B core processor, running at a frequency of 100MHz
- 128kB on-chip flash memory
- 128kB on-chip shadow program memory
- True zero wait states (0WS) up to 3.1 DMIPS per MHz performance
- 32kB on-chip data memory
- Integrated phase-locked loop (PLL) supports single external 12MHz crystal and direct external clock source input
- Real-time clock (RTC) with automatic calibration to compensate for inaccuracies in low-cost 32.768 kHz crystal or other input source
- D2xx hardware engine (USB 2.0 device) with up to 7 interfaces
- One USB 2.0 device controller supports high-speed (480Mbit/s) and full-speed (12Mbit/s)
- USB 2.0 device controller supports isochronous, interrupt, control, and bulk transfers for up to 15 endpoints
- Supports one-wire debug for firmware download and software debugging
- One SPI primary supports single/dual/quad modes of data transfer
- Clock rate is up to 25MHz
- One SPI secondary supports single data transfer up to 25MHz
- SD host controller conformant to SDA SD host controller specification V3.0, running up to 25 MHz and software support for SD / SDHC / SDXC cards
- I2C bus interfaces may be configured as primary or secondary, supporting standard / fast / fast-plus / high-speed mode data transfers
- Maximum data transfer rate up to 3.4Mbit/s
- Clock stretching is supported
- Four UARTs configurable as two full UART interfaces or 4 half UART interfaces
- Four 16-bit timers with prescaler and 32-bit watchdog timer
- Supports eight independent PWM channels, PWM channel 0 and 1 may be configured as stereo audio output channels, supporting PCM 8-bit/16-bit stereo data
- Supports two independent 10-bit DACs
- DAC 0/1 channel output and sample rate of ~1MS/s
- Supports three 8-bit ADC1/2/3 channel input
- Sample rate of ~480KS/s
- Single 3.3V power supply, built-in 1.2 V regulator
- 3.3V I/O power supply, all GPIO pins are 5V tolerant
- Supports USB battery charging Specification Rev 1.2
- Power-on reset (POR)
- -40°C to +85°C extended operating temperature range
Applications
- Companion with Bridgetek FT81x Embedded Video Engine for multi-screen displays
- USB to multiple interfaces bridging (up to 15 endpoints)
- Motor drives and application control
- E-meters
- DAQ system industrial automation
- Medical appliances
- Instrumentation
Block Diagram
Development Tools
Bridgetek MM930Lite Development Module
Evaluation and demonstration tool based on the FT930Q Embedded Microcontroller.
Bridgetek MM930Mini USB MCU Development Module
High-speed USB 2.0 Microcontroller evaluation and development tool, based on the FT930Q Bridge IC.
Bridgetek MM932LC Development Module
Evaluation and demonstration tool based on the FT932Q Embedded Microcontroller.
Bridgetek FT90x Series Development Modules
UMFTPD2A debugger/programmer module, MM900EV1A/2A/3A, and MM900EV LITE development modules.
Publicado: 2017-05-30
| Actualizado: 2023-04-03